
AXQ-2Q · Mounting presses
AXQ-2Q

Explore the original technical specifications, related methods and configuration options. Chinese source specifications are retained for accuracy.
AXQ-5属于智能自动金相试样镶嵌机,采用彩色触摸屏PLC控制系统,智能化操作,一键式镶嵌,无需操作人员在机器旁值守。智能控温、智能加压、智能水冷。镶嵌规格可更换。适用于所有材料(热固性和热塑性)的热镶嵌。
| Parameter | Value / description |
|---|---|
| No. | Model | AXQ-5 |
| 10 | Temperature range | Ambient-300℃ |
| 11 | Pressure range | 0-2MPA(specimen preparation压强0-72MPA) |
| 12 | Heating time | 0-99分(Adjustable) |
| 13 | Control power supply | 220V |
| 14 | Dimensions | 700X550X550mm |
| Model | AXQ-5 |
| Specimen specification | ¢25mm/30mm/40mm/45mm(OthersSpecification can 定做) |
| Benchtop | 3 |
| Control system | Color touch screen, PLC control |
| Automatic | 5 |
| AutomaticCooled in water(智 can 定 when ) | 9 |
| Heater specification | 1600W |
| Temperature range | Ambient-300℃ |
| Pressure range | 0-2MPA(specimen preparation压强0-72MPA) |
| Heating time | 0-99 minutes (adjustable) |
| Control power supply | 220V |
| Dimensions | 700X550X550mm |
Confirm the applicable method and standard.
Topic-based references do not certify this model or establish full conformity. Confirm the applicable edition, configuration and test conditions.
Scientific detail below is the Chinese source edition; reviewed full translations are pending.
Series-level guidance · Sample preparation · Confirm model capabilities, accessories and specifications.
The specimen is embedded by hot pressing, cold curing or a specified curing method to support clamping, edge retention and the viewing direction. The curing route must match the heat and pressure resistance of the material.
The schematic explains the basic mechanism; it is not a structural drawing of this model, an operating instruction or a measured result.
Mounting support and edge protection
Schematic model, not device footage or experimental data.
Follow inputs, actions, outputs and quality gates.
Define the research questions: Does mounting alter the microstructure, cause cracking, or penetrate pores?; Can the observation face and orientation be reliably preserved? Record sample identity, target results and required configuration in the test plan.
Clean and dry the specimen, determine the section orientation, and assess heat, pressure and solvent sensitivity.
Check the mold, seals and temperature/pressure control, or the cold-curing mixing tools.
Select a suitable resin and curing route; record the batch number and process conditions.
After fixing the orientation, mount, cure and cool, avoiding movement, bubbles and premature demoulding.
Check edge gaps, cracks and mounting bubbles; mark the orientation before grinding and polishing.
Archive the sample ID, model/accessories, raw records, processing version and anomaly handling with cross-references. Re-measure under identical conditions or check disputed results against the reference method.
Verify the edition, specimen and configuration. Links do not constitute certification or a conformity claim.
Such devices or accessories do not necessarily produce an independent measurand. First use the workflow below to confirm the calculation object, calibration basis and input units, then use the relevant reference tools.
Reference calculations ↗Links indicate related methods or research objects, not evidence that a paper used our instruments.
Standards index: Metallographic cutting, mounting, polishing and etching for Marine & offshore engineering. Organised ar…
Open research record ↗Testing solutions: Metallographic cutting, mounting, polishing and etching for General. Organised around GB/T 13298-2015…
Open research record ↗Industry applications: Metallographic cutting, mounting, polishing and etching for Semiconductor & packaging. Organised…
Open research record ↗Theory calculators: Metallographic cutting, mounting, polishing and etching for Marine & offshore engineering. Organised…
Open research record ↗Instrument principles: Metallographic cutting, mounting, polishing and etching for General. Organised around GB/T 13298-…
Open research record ↗Research workflows: Metallographic cutting, mounting, polishing and etching for Semiconductor & packaging. Organised aro…
Open research record ↗Other models in Mounting presses and the same instrument family.

AXQ-2Q

AXQ-5S

AXQ-5Y

AXQ-50

AXQ-50Y

AXQ-100
Tell us about your material, specimen and measurement goal.