
BMP-2(BMP-2000) · Grinding & polishing
BMP-2(BMP-2000)



Explore the original technical specifications, related methods and configuration options. Chinese source specifications are retained for accuracy.
BMP-1(BMP-1000)金相试样磨抛机是一种研磨抛光设备,它利用各种不同粒度的耐水研磨金相砂纸,对各种金属及其合金试样以及各种岩相试样进行粗磨、精磨、干磨、湿磨等各道研磨工序,作抛光前的粗加工工序,同时可作抛光试样。可一次性完成磨抛工作,起到一机多用的好处。
| Parameter | Value / description |
|---|---|
| Grinding/polishing disc diameter | φ200mm |
| Rotational speed | 六档 |
| Motor | 0.37/0.25KW |
| Power supply | 380V/50Hz |
| Overall dimensions | 360x590x560mm |
| Main unit weight | 35KG |
Confirm the applicable method and standard.
Topic-based references do not certify this model or establish full conformity. Confirm the applicable edition, configuration and test conditions.
Scientific detail below is the Chinese source edition; reviewed full translations are pending.
Series-level guidance · Sample preparation · Confirm model capabilities, accessories and specifications.
Abrasives and polishing media remove surface material step by step, balancing flatness, edge retention and the removal rates of different phases. The final surface must pass microscopic inspection.
The schematic explains the basic mechanism; it is not a structural drawing of this model, an operating instruction or a measured result.
Progressive grinding and removal of the surface deformation layer
Schematic model, not device footage or experimental data.
Follow inputs, actions, outputs and quality gates.
Define the research question: Do scratches, smearing or pull-out come from preparation or from the material?; Does relief or edge rounding occur between soft and hard phases? Record sample identity, target result and required configuration in the test plan.
Assess previous cutting damage and mounting quality; record sample orientation and target area.
Check grinding disc flatness, fixture parallelism, rotation speed and coolant supply.
Select abrasive sequence, polishing cloth, load and rotation direction by material; avoid cross-step contamination.
Grind and polish step by step with cleaning in between; rotate the specimen to identify residual scratches from the previous step.
Inspect scratches, relief, pull-out and edge retention under a microscope; return to a previous step if needed.
Archive the sample ID, model/accessories, raw records, processing version and anomaly handling with cross-references. Re-measure under identical conditions or check disputed results against the reference method.
Verify the edition, specimen and configuration. Links do not constitute certification or a conformity claim.
Such devices or accessories do not necessarily produce an independent measurand. First use the workflow below to confirm the calculation object, calibration basis and input units, then use the relevant reference tools.
Reference calculations ↗Links indicate related methods or research objects, not evidence that a paper used our instruments.
Standards index: Metallographic cutting, mounting, polishing and etching for Marine & offshore engineering. Organised ar…
Open research record ↗Testing solutions: Metallographic cutting, mounting, polishing and etching for General. Organised around GB/T 13298-2015…
Open research record ↗Industry applications: Metallographic cutting, mounting, polishing and etching for Semiconductor & packaging. Organised…
Open research record ↗Theory calculators: Metallographic cutting, mounting, polishing and etching for Marine & offshore engineering. Organised…
Open research record ↗Instrument principles: Metallographic cutting, mounting, polishing and etching for General. Organised around GB/T 13298-…
Open research record ↗Research workflows: Metallographic cutting, mounting, polishing and etching for Semiconductor & packaging. Organised aro…
Open research record ↗Other models in Grinding & polishing and the same instrument family.

BMP-2(BMP-2000)

MP-2A

MP-3A

MPD-1

MPD-1A

MPD-1J
Tell us about your material, specimen and measurement goal.