SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
ZHR-150S · 1
ZHR-150S · 2
ZHR-150S · 3
3D turntable
1 / 3
MODEL · ZHR-150S

ZHR-150S · Rockwell hardness testers

Explore the original technical specifications, related methods and configuration options. Chinese source specifications are retained for accuracy.

Product description

Automatic indentation and automatic calculation of hardness values are achieved. Operation is simple and convenient. The control panel features a menu-based structure, offering excellent reliability, operability, and intuitiveness.

适用于金属材料的洛氏硬度试验。本系列仪器操作简便迅速,性能稳定,使用广泛。可进行黑色金属和有色金属的洛氏硬度测定,广泛适用于工厂车间和计量部门.

Performance features:

  • Laptop Control
  • Closed-loop sensor control system, no weights required
  • No special installation required, and no after-sales service needed
  • No initial test force required; automatic test force loading/unloading
  • High measurement accuracy, automatic hardness value correction
  • Real-time curve displayed during testing
  • Data can be imported to a computer at any time
  • When a hardness scale is selected, the required indenter is prompted

Standard configuration:

  • Main unit 1台
  • Computer (hardness measurement system software (installed on the computer) 1 set
  • Diamond Rockwell indenter 1只
  • Diameter 1.5875 mm球Indenter 1只
  • Three test benches in total: large flat test bench, medium flat test bench, and "V"-type test bench
  • 标准洛氏硬度块HRB、HRC高、HRC低 各1块
  • 保险丝 2根
  • Power line 1 .
  • 1 USB flash drive
  • 4 Foot Screws
  • 1 dust bag
  • 1 Product Certificate of Conformity
  • 1 Product User Manual

Specifications

ParameterValue / description
Rockwell total test force60kgf (588.4N)、100kgf (980.7N)、150kgf (1471N)
Hardness measuring rangeHRA:20~88 ,HRB:20~100 ,HRC:20~70
Rockwell scales total 15HRA、HRB、HRC、HRD、HRE、HRF、HRG、HRH、HRK、HRL、HRM、HRP、HRR、HRS、HRV
Max. allowable specimen height220mm
Indenter centre to column distance200mm
Supply voltageAC220V±5%,50~60Hz
Delay control1~60 s, adjustable
Specifications, options and final delivery conditions follow the confirmed technical agreement and factory documents; verify any model discrepancy with an engineer.

Related methods & standards

Vickers hardness: from indentation to hardness profiles ↗Brinell hardness: assessing a larger material region ↗Rockwell hardness: interpreting two depth readings ↗Knoop hardness: elongated indents and layer limitations ↗Instrumented indentation: from load–depth curves to contact properties ↗Rockwell hardness and hardened case evaluation: method essentials and limits ↗Brinell hardness on coarse cast structures: method essentials and limits ↗Vickers hardness profile and case depth: method essentials and limits ↗Microhardness matched to coating thickness: method essentials and limits ↗Knoop hardness on brittle ceramics: method essentials and limits ↗Leeb hardness in the field and conversion checks: method essentials and limits ↗Shore and Barcol hardness on elastomers: method essentials and limits ↗Limits of Rockwell to Brinell conversion: method essentials and limits ↗Indentation size effect and load selection: method essentials and limits ↗Hardness mapping across a weld heat-affected zone: method essentials and limits ↗Effective case depth of carburised layers: method essentials and limits ↗Induction-hardened depth and transition zone: method essentials and limits ↗Nitrided layer hardness and brittleness rating: method essentials and limits ↗Laser-hardened track overlap evaluation: method essentials and limits ↗Hardness anisotropy in additively manufactured parts: method essentials and limits ↗Hot hardness and softening onset: method essentials and limits ↗Low-temperature hardness and ductile-brittle transition: method essentials and limits ↗In-situ vacuum high-temperature indentation: method essentials and limits ↗Separating coating hardness from substrate effect: method essentials and limits ↗Daily verification with reference blocks: method essentials and limits ↗Indenter geometry and area-function calibration: method essentials and limits ↗Uncertainty budget for hardness measurement: method essentials and limits ↗Empirical hardness to tensile strength correlation: method essentials and limits ↗Hardness sampling on small and thin parts: method essentials and limits ↗

GB / Chinese standards

GB/T 230.1-2018 ↗GB/T 230.1-2018 ↗GB/T 230.2-2022 ↗GB/T 230.3-2022 ↗GB/T 17394.1-2014 ↗GB/T 17394.2-2012 ↗GB/T 17394.3-2012 ↗GB/T 17394.4-2014 ↗GB/T 1172-1999 ↗GB/T 9790-2021 ↗

ISO

ISO 6508-1:2023 ↗

Topic-based references do not certify this model or establish full conformity. Confirm the applicable edition, configuration and test conditions.

SCIENCE / ZHR-150S

Explore research with this instrument.

Open series research profile ↗

Scientific detail below is the Chinese source edition; reviewed full translations are pending.

Series-level guidance · Measurement and analysis · Confirm model capabilities, accessories and specifications.

Working principle & animation

A datum is established at the preliminary test force, the total test force is then applied and reduced back to the preliminary force, and the selected Rockwell scale is determined from the incremental residual depth. Different scales use different indenters, forces and constants.

The schematic explains the basic mechanism; it is not a structural drawing of this model, an operating instruction or a measured result.

Depth difference between the preliminary test force and total test force

Schematic model, not device footage or experimental data.

HR = N − h / S
SymbolMeaningUnit
hResidual depth increment after the specified loading cyclemm
NConstant of the corresponding scaleDimensionless
SDepth unit of the corresponding scalemm
  • Methods and models apply only under the confirmed specific model, accessories and sample conditions.

Research objects & questions

  • Heat-treated steel parts
  • Castings
  • Alloy parts
  • Is batch hardness stable on the same scale?
  • Do surface condition or curvature affect readings?

Testing & operation workflow

Follow inputs, actions, outputs and quality gates.

  1. 01

    Define the object and outcome

    Define the research question: Is batch hardness stable on the same scale?; Do surface condition or curvature affect readings? Record sample identity, target result and required configuration in the test plan.

    Input
    Sample information, technical drawings / study protocol and documentation for this model
    Output
    A record specifying the object, outcome definition and available configuration
    Quality check
    Required functions are evidenced in the specific model and accessories; unverified functions remain to be confirmed
  2. 02

    Prepare samples and conditions

    Clean the support surface, check surface oxidation, curvature and minimum thickness; do not apply bulk conditions directly to thin layers.

    Input
    Defined research object and sample information
    Output
    Traceable samples and preparation conditions
    Quality check
    Stable support and no surface contamination
  3. 03

    Check references and equipment

    Check the measuring system with the same scale and reference blocks appropriate to the hardness range.

    Input
    Prepared samples, reference specimens and equipment records
    Output
    Verification records and availability status
    Quality check
    Reference verification complies with the method adopted
  4. 04

    Establish the method and procedure

    Confirm the indenter, preliminary test force, total test force and dwell time; record the scale used.

    Input
    Verification results and actual available configuration
    Output
    Saved conditions, parameters and termination rules
    Quality check
    Indenter correctly matched to the scale
  5. 05

    Execute and save raw records

    After stabilizing the support, complete the preload–main load–unload cycle and record the raw readings.

    Input
    Approved test procedure and quality control settings
    Output
    Raw data, process conditions and anomaly records
    Quality check
    No impact, slipping, or specimen deflection
  6. 06

    Review results and model

    Retest scattered points and check position effects; report by scale, do not mix HRC, HRB or superficial Rockwell values.

    Input
    Raw signals, reference data and method definition
    Output
    Results with applicability limits and review records
    Quality check
    Traceable scale and handling of outliers
  7. 07

    Archive and reproduce

    Archive the sample ID, model/accessories, raw records, processing version and anomaly handling with cross-references. Re-measure under identical conditions or check disputed results against the reference method.

    Input
    Reviewed results, raw records and configuration list
    Output
    Traceable research/process records and follow-up verification items
    Quality check
    Teaching calculations, demonstration simulations and real measured data are clearly distinguished; unverified items in the materials are not presented as performance commitments.

Workflows & applications

  • Application: heat-treated steel parts; Research objective: Is batch hardness stable on the same scale?
  • Application: castings; Research objective: Do surface condition or curvature affect readings?
  • Application: alloy parts; Research objective: Is batch hardness stable on the same scale?

Methods & standards

  • Rockwell depth hardness

GB/T 230.1 Metallic materials — Rockwell hardness test — Part 1: Test method

Index of method scope; the version adopted and specific clauses must be verified; this does not constitute certification or a declaration of conformity for this model.

Official source ↗

ISO 6508-1 Metallic materials — Rockwell hardness test — Part 1: Test method

Index of method scope; the version adopted and specific clauses must be verified; this does not constitute certification or a declaration of conformity for this model.

Official source ↗

Verify the edition, specimen and configuration. Links do not constitute certification or a conformity claim.

Calculations & simulation

Scientific literature connection

Direct paper links for this series are pending review. Related topics do not establish use of this model.

Research library ↗

Resources, service & limits

  • Check the measuring system with the same scale and reference blocks appropriate to the hardness range.
  • Indenter correctly matched to the scale
  • Verify the delivered model, required accessories, method scope and raw data output; do not infer performance from the series name.
  • N and S must be taken from the scale in use; the page does not preset universal values for them.
  • Combined Brinell/Rockwell/Vickers equipment must be switched to the corresponding method; Brinell/Vickers results must not be interpreted by the depth method.
  • This dossier covers principles and research workflow; the absence of a measuring-range statement on the page does not mean the device has no limits: the specific range and configuration are subject to technical verification.

Related industry research

Similar instruments

Other models in Rockwell hardness testers and the same instrument family.

Browse the whole family ↗

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.