MICROCRE · RESEARCH SCIENCE
钛与钛合金
研究目标
结合方向性、加工损伤、薄壁几何与力学表现,比较传统及增材样品时保持几何和后处理状态一致。
研究问题
构建或加工方向是否影响组织和有效力学响应?
薄壁读数是否受到接触压陷、支撑或未知材料参数影响?
制样变形和真实组织变化怎样通过对照区分?
组织与性能的关系
方向、热历史和缺陷位置共同影响试样表现,不能把单批差异全部归因成分。
切割及磨抛可能引入表层损伤,局部硬度研究需要验证去损伤程度。
薄壁几何与试样尺寸可影响测试边界及取样代表性。
适用边界
材料实验不替代具体医疗、航空或其他产品级资格评价。
不同尺寸试样和复杂零件之间外推需独立验证。
关联仪器、方法与研究依据
金属增材:构建方向—缺陷—性能 →自由曲面:配准、法向偏差与采样覆盖 →轴类零件:直径、圆度与圆柱形貌 →薄壁件:厚度、接触变形与内腔 →疲劳研究:应力比、循环与未断样 →拉伸性能:从尺寸到应力—应变与断口 →
论文关联表示方法或研究对象相关,不表示论文采用了本型号仪器。
Ultraviolet digital image correlation (UV-DIC) for high temperature applications →Microstructure Analysis for Additive Manufacturing: A Review of Existing Standards →Size-affected single-slip behavior of pure nickel microcrystals →Investigation of complementary use of optical metrology and x-ray computed tomography for surface finish in laser powder bed fusion additive manufacturing →Temperature dependence of the indentation size effect →A novel approach for extending autocollimator calibration from plane to spatial angles →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Fiji: an open-source platform for biological-image analysis →NIH Image to ImageJ: 25 years of image analysis →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →Determination of displacements using an improved digital correlation method →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Measurement of high temperature full-field strain up to 2000 °C using digital image correlation →Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe →ASTM Technical Committee Guidance — DIC 测量的报告要求 →EURAMET Calibration Guide — 硬度计校准与不确定度评定 →NPL Good Practice Guide — DIC 散斑制备与质量评价 →NPL Good Practice Guide — 不确定度预算的编制 →Digital image correlation using Newton-Raphson method of partial differential correction →Applications of digital-image-correlation techniques to experimental mechanics →Evaluation of measurement data — Guide to the expression of uncertainty in measurement (GUM) →Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review — Extended reading 31 →Digital imaging techniques in experimental stress analysis →Image Correlation for Shape, Motion and Deformation Measurements →
