| Model | HV-10Z |
| Turret type | Automatic turret |
| Loading mechanism | Dead-weight loading |
| Elevation mechanism | Precision trapezoidal lead screw |
| Hardness display | LCD screen |
| HV-10Z test force | (10Kg):0.3kgf、0.5kgf、1kgf、3kgf、5kgf、10kgf; |
| Scale conversion | HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T |
| Test force application | Fully automatic (loading / dwell / unloading) |
| Applicable standards | GB/T4340 national standard, ISO6507 quality certification, ASTM standard |
| Theoretical hardness range | 8 - 3000HV |
| Eyepiece magnification | 10X (mechanical eyepiece) |
| HV-10Z objective magnification | (5Kg, 10Kg): 10X (observation), 20X (measurement) |
| HV-10Z total magnification | (5Kg, 10Kg): 100X (observation), 200X (measurement) |
| Readout mode | Drum reading |
| Calculation mode | Automatic calculation |
| Minimum increment | 1μm |
| Dwell time | 0 - 99 s, minimum increment 1 s |
| Max. specimen height | 245mm |
| Indenter centre to inner wall | 138mm |
| Supply voltage | AC 220V/50Hz |
| Dimensions | 570*250*680mm (L*W*H) |
| Net weight | 46.0kg |
| Gross weight | 61.0kg |
| Eyepiece | 10X |
| Objective | 10X、20X |
| Weights | 6档力 3只 |
| Stage / anvil | Large, medium and V-type specimen stages |
| Hardness block | One high and one medium |
| Indenter | One diamond Vickers indenter |
| Spare fuse | (1A) 2 pcs |
| Power cable | 1 pc |
| Leveling feet | 4 pcs |
| Certificate and warranty card | 1 set |
| User manual | 1 copy |
| 10 | Remote control module | HMAS-Y (PC required) |
| 11 | Stress and fracture toughness module | HMAS-FS (PC required) |
| (10Kg) | 0.3kgf、0.5kgf、1kgf、3kgf、5kgf、10kgf |
| (5Kg、10Kg) | 10X (observation), 20X (measurement) |
| Stage size | 100X100mm, stage travel 25X25mm, mechanical readout 0.01mm |
| Digital stage size | 100X100mm, stage travel 25X25mm, digital readout 0.001mm |
| Automatic motion control stage | 4 |
| Platform / stage | Medium-flat test bench, large V-shaped test bench |
| Mechanical eyepiece | 15X eyepiece (mechanical eyepiece) |
| Knoop indenter (Knoop-specific) | 7 |
| Thin-section holder, mounting holder, fine-wire holder, universal holder, flat-jaw holder, | 8 |
| Measurement & analysis system | HMAS-C/HMAS-D/HMAS-CE/HMAS-DE (PC required) |
| Video analysis system | LCD |
| Remote control module | HMAS-Y (requires a PC) |
| Stress and fracture toughness module | HMAS-FS (PC required) |