SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
INDUSTRIES

TGA and mass loss: industry application

Test plan for "TGA and mass loss". Specimens of PEEK engineering polymer are measured under immersion in corrosive medium following compositional and thermal analysis. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports refractive index and thickness with explicit limits of interpretation.

Reporting requirements

Method name and standard edition

Sampling location, specimen condition and count

Environment, equipment and calibration status

Result, dispersion, uncertainty and decision

Common misconceptions

Reusing historical data from a similar material while ignoring batch and process differences

Reporting only a mean value without dispersion, repeatability or uncertainty

Workflow & steps

01

Fix the analyte or property

Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

02

Sample and pre-treat

Prepare specimens or measurement points for the material and purpose: build calibration and blanks, verify detection limit and drift, avoid contamination during digestion or preparation, and insert quality-control samples in each batch.

03

Build calibration and QC

Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

04

Measure per method

Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

05

Check interference and LOD

Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

06

Compute content and report

Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

Checks

  • • The acceptance basis traces to a standard clause or technical agreement
  • • Environmental conditions and stabilisation time are logged continuously
  • • Raw data, processing and the decision are reproducible

Illustrative example

Teaching example: use PEEK engineering polymer measured under immersion in corrosive medium to show the record format and decision flow; values are assumed, not customer measurements.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.