SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
METHODS

Cutting burn control on hardened steel: method essentials and limits

Test plan for "Cutting burn control on hardened steel". Specimens of 304 austenitic stainless steel are measured under high pressure 10 MPa at 1200 °C following sectioning, mounting and polishing workflow. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports elongation and reduction of area with explicit limits of interpretation.

Reporting requirements

Method name and standard edition

Sampling location, specimen condition and count

Environment, equipment and calibration status

Result, dispersion, uncertainty and decision

Common misconceptions

Reusing historical data from a similar material while ignoring batch and process differences

Reporting only a mean value without dispersion, repeatability or uncertainty

Workflow & steps

01

Define the section plane and location

Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

02

Select cutting process and cooling

Prepare specimens or measurement points for the material and purpose: select the cut-off wheel and cooling by hardness and microstructure, then grind and polish stepwise with cleaning between steps to avoid smearing and relief.

03

Mount and label the specimen

Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

04

Grind and polish stepwise

Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

05

Etch and inspect under the microscope

Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

06

Record parameters and artefacts

Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

Checks

  • • The acceptance basis traces to a standard clause or technical agreement
  • • Environmental conditions and stabilisation time are logged continuously
  • • Raw data, processing and the decision are reproducible

Illustrative example

Teaching example: use 304 austenitic stainless steel measured under high pressure 10 MPa at 1200 °C to show the record format and decision flow; values are assumed, not customer measurements.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.