MICROCRE · RESEARCH SCIENCE
Coatings, thin layers and graded interfaces
Translation pending review.
Research objective
Organize thickness, interfaces, pores and local properties spatially while assessing substrate and roughness effects.
Research questions
层厚变化与局部功能或压入响应的差异是否对应?
界面脱开是原始缺陷还是切割、镶嵌和抛光造成?
所选测试尺度能否分离涂层与基体贡献?
Structure–property relationships
硬软相组合容易产生浮雕、涂抹与拉出,因此制样质量直接影响结构解释。
薄层接触响应同时受基体、粗糙度及接触面积模型影响。
截面形貌、局部硬度与附着、耐久或光学功能是不同证据,需要直接功能验证。
Limitations
层厚十分之一等经验条件不能替代实际基体影响验证。
界面图像良好不等同附着强度或耐久性能合格。
Related instruments, methods and research
Metallographic cutting →Microhardness testers →Metallurgical microscopes →Mounting presses →Grinding & polishing →Prism couplers →Thickness gauges →
Functional coatings: layer structure and property trade-offs →Semiconductor films: thickness, uniformity and transport →Coating thickness: non-destructive and section checks →Surface roughness: direction, filtering and function →Environmental durability: exposure and paired controls →Hardness and indentation: scale and contact models →Optical performance: transmission, refraction and scattering →
Metallographic cutting →Microhardness testers →Metallurgical microscopes →Mounting presses →Grinding & polishing →Prism couplers →Thickness gauges →
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Orientation imaging: The emergence of a new microscopy →The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte →Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques →Scaling approach to conical indentation in elastic-plastic solids with work hardening →Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C →Using nanoindentation to study the aging of cellulose acetate in cinematographic films →Computational modeling of the forward and reverse problems in instrumented sharp indentation →A procedure for extracting primary and secondary creep parameters from nanoindentation data →Size-affected single-slip behavior of pure nickel microcrystals →A method for interpreting the data from depth-sensing indentation instruments →High temperature nanoindentation – the importance of isothermal contact →Temperature dependence of the indentation size effect →A novel approach for extending autocollimator calibration from plane to spatial angles →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Anisotropy oxidation behavior and mechanism of textured Ti3(SiAl)C2 ceramic →Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Transmission EBSD from 10 nm domains in a scanning electron microscope →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments →On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Discrepancies between roughness measurements obtained with phase-shifting and white-light interferometry →Fiji: an open-source platform for biological-image analysis →NIH Image to ImageJ: 25 years of image analysis →Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments →Nanoindentation and contact-mode imaging at high temperatures →Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →Deformation mechanism and mechanical properties of TiN/ZrN nanolaminates by nanoindentation: effect of layer thickness and temperature →High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation →Thermally Activated Deformation Mechanisms in MgO Investigated via High Temperature Scanning Indentation →AFM z-piezo calibration method for height measurements in the sub-nanometer to nanometer range using stepped surfaces →Hot nanoindentation in inert environments →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe →Elevated temperature, in situ indentation with calibrated contact temperatures →High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity →A systematic study of sample preparation-induced martensitic phase formation in 304 L austenitic stainless steel →EURAMET Calibration Guide — 硬度计校准与不确定度评定 →NPL Good Practice Guide — 不确定度预算的编制 →Evaluation of measurement data — Guide to the expression of uncertainty in measurement (GUM) →
