SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
MICROCRE · RESEARCH SCIENCE

探伤仪 — Vibration spectrum and fault diagnosis

A schematic of the measurement chain, not device footage or data.

Schematic demonstration: scale, speed and colour do not represent instrument measurements.

Translation pending review.

Instrument role

Measurement and analysis

Operating principle

Principle summary

For this task the 探伤仪 family measures as follows: Vibration spectrum and fault diagnosis. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.

Equation

a = k / (ρ c_p)

Variables and units
  • Symbol

    k

    Item

    Thermal conductivity

    Unit

    W/(m·K)

  • Symbol

    rho

    Item

    Density

    Unit

    kg/m³

  • Symbol

    cp

    Item

    Specific heat

    Unit

    J/(kg·K)

Assumptions and limits
  • Conditions are stable and calibrated as defined

  • Inputs are independent without unmodelled bias

  • Interpretation stays within this family and the stated conditions

Research objects

  • Research object: 42CrMo quenched and tempered steel

  • Research object: 20CrMnTi carburising steel

  • Research object: 40Cr alloy structural steel

Research questions

  • What dominates the error budget for Vibration spectrum and fault diagnosis?

  • Does the conclusion hold for another batch or process?

Applications

  • Vibration spectrum and fault diagnosis: 42CrMo quenched and tempered steel

  • Vibration spectrum and fault diagnosis: 20CrMnTi carburising steel

From specimen to result

  1. 01
    Title

    Read the drawing, datum and tolerance

    Action

    Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

    Input

    Previous output

    Output

    Step 1 record

    Quality gate

    The acceptance basis traces to a standard clause or technical agreement

    If the check fails

    Return and re-check

    Instruments for this step
  2. 02
    Title

    Clean and thermally soak the part

    Action

    Prepare specimens or measurement points for the material and purpose: soak to 20 °C and clean the surface, establish the datum and frame, calibrate the probe, then choose points and evaluation rules from the drawing.

    Input

    Previous output

    Output

    Step 2 record

    Quality gate

    Environmental conditions and stabilisation time are logged continuously

    If the check fails

    Return and re-check

    Instruments for this step
  3. 03
    Title

    Calibrate probe or transducer

    Action

    Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

    Input

    Previous output

    Output

    Step 3 record

    Quality gate

    Raw data, processing and the decision are reproducible

    If the check fails

    Return and re-check

    Instruments for this step
  4. 04
    Title

    Acquire points as planned

    Action

    Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

    Input

    Previous output

    Output

    Step 4 record

    Quality gate

    The acceptance basis traces to a standard clause or technical agreement

    If the check fails

    Return and re-check

    Instruments for this step
  5. 05
    Title

    Fit features and evaluate tolerance

    Action

    Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

    Input

    Previous output

    Output

    Step 5 record

    Quality gate

    Environmental conditions and stabilisation time are logged continuously

    If the check fails

    Return and re-check

    Instruments for this step
  6. 06
    Title

    Review outliers and report

    Action

    Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

    Input

    Previous output

    Output

    Step 6 record

    Quality gate

    Raw data, processing and the decision are reproducible

    If the check fails

    Return and re-check

    Instruments for this step

Methods and standards

  • dimensional measurement and flaw detection

  • Confirm force, range and threshold against the applicable standard

Standards and applicability

  • ASTM E1444/E1444M-22

  • ASTM E165/E165M-23

  • ASTM E114-15

  • ASTM E2375-23

  • ASTM E1004-17

Configuration and service checks

  • Calibration and intermediate check records

  • Fixtures, accessories and range confirmation

Limitations

  • Family-level guidance, not a specific model capability

  • Re-confirm method and criteria outside the stated conditions

Search terms

  • 几何计量

  • 无损检测

  • 自准直仪

  • 精密运动控制

  • 芯片测试

Related instruments, methods and research

Paper links indicate related methods or objects; they do not establish use of this instrument model.

Relation commonly used for this task

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.