Lumped-capacitance cooling time: parameter sweep
Translation pending review.
Description
Sweep "Density" with the other inputs fixed and evaluate the same equation point by point. Shows sensitivity, not measured instrument performance.
Equation
t = (ρVc_p / hA) · ln(ΔT₀/ΔT)
Input parameters
- key
rho
label密度 Density
Unitkg/m³
Value7850
min1
max25000
stepany
- key
V
label体积 Volume
Unitcm³
Value50
min1.0E-9
max1000000000
stepany
- key
cp
label比热容 Specific heat
UnitJ/(kg·K)
Value470
min1
max20000
stepany
- key
h
label换热系数 Heat transfer coefficient
UnitW/(m²·K)
Value60
min0.001
max100000
stepany
- key
A
label表面积 Surface area
Unitcm²
Value90
min1.0E-9
max1000000000
stepany
- key
dT0
label初始温差 Initial difference
UnitK
Value200
min1.0E-6
max3000
stepany
- key
dT
label目标温差 Target difference
UnitK
Value10
min1.0E-6
max3000
stepany
Outputs
- key
start
label起点值
Units
- key
end
label终点值
Units
- key
span
label变化量
Units
Assumptions and limits
除扫描变量外其余输入保持不变
公式所列假设在扫描区间内成立
扫描区间内不出现定义域外取值
Limitations
教学演示,不含测量噪声、漂移与迟滞
不构成仪器性能、材料常数或验收结论
Model method
在首个输入上等间距取 121 点,其余输入取页面默认值,按同一表达式逐点求值。
Validation
端点值与解析代入一致;区间内单调性由表达式决定,不额外平滑。
Execution and reproduction
未提供独立脚本;曲线由浏览器按同一公式逐点计算。
Curve
rho
密度 Density
t
121
3925
11775
Expr
rho*V*cp/(h*A/1e4)*log(dT0/dT)
Search terms
检测方法
标准规范
选型方案
科研流程
模拟实验
