SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
SOLUTIONS

Interlaminar shear of composites: test plan design

Test plan for "Interlaminar shear of composites". Specimens of GCr15 bearing steel are measured under ultra-high vacuum 1e-7 Pa following mechanical property testing. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports refractive index and thickness with explicit limits of interpretation.

Reporting requirements

Method name and standard edition

Sampling location, specimen condition and count

Environment, equipment and calibration status

Result, dispersion, uncertainty and decision

Common misconceptions

Reusing historical data from a similar material while ignoring batch and process differences

Reporting only a mean value without dispersion, repeatability or uncertainty

Workflow & steps

01

Fix the property, method and standard

Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

02

Machine and measure specimens

Prepare specimens or measurement points for the material and purpose: machine specimens to the standard, measure actual dimensions, align the grips, preload and then load at the specified rate while recording force, displacement and time.

03

Align grips and mount the extensometer

Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

04

Load at the specified rate and acquire

Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

05

Check failure mode and validity

Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

06

Compute properties and report

Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

Checks

  • • The acceptance basis traces to a standard clause or technical agreement
  • • Environmental conditions and stabilisation time are logged continuously
  • • Raw data, processing and the decision are reproducible

Illustrative example

Teaching example: use GCr15 bearing steel measured under ultra-high vacuum 1e-7 Pa to show the record format and decision flow; values are assumed, not customer measurements.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.