SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
SOLUTIONS

Rotary table indexing error and backlash: test plan design

Test plan for "Rotary table indexing error and backlash". Specimens of SiC power device solder layer are measured under vibration and shock environment following small-angle and straightness measurement. The plan fixes sampling, measurement parameters, acceptance basis and record format, and reports strain and displacement field with explicit limits of interpretation.

Reporting requirements

Method name and standard edition

Sampling location, specimen condition and count

Environment, equipment and calibration status

Result, dispersion, uncertainty and decision

Common misconceptions

Reusing historical data from a similar material while ignoring batch and process differences

Reporting only a mean value without dispersion, repeatability or uncertainty

Workflow & steps

01

Establish the datum and coordinate frame

Turn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.

02

Set the mirror and targets

Prepare specimens or measurement points for the material and purpose: clean and thermally soak the datum, place the mirror or target along the travel, verify zero and bidirectional repeatability, then step at equal intervals.

03

Verify zero and repeatability

Verify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.

04

Acquire angle or displacement in steps

Execute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.

05

Fit straightness and angular error

Judge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.

06

Assess environment and uncertainty

Report method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.

Checks

  • • The acceptance basis traces to a standard clause or technical agreement
  • • Environmental conditions and stabilisation time are logged continuously
  • • Raw data, processing and the decision are reproducible

Illustrative example

Teaching example: use SiC power device solder layer measured under vibration and shock environment to show the record format and decision flow; values are assumed, not customer measurements.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.