SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
TOPICS

Microscope image length calibration

Translation pending review.

利用同一成像配置下标尺的已知长度和像素跨度计算比例,再把待测像素跨度换为物方长度。建议使用原始图像上的可溯源标尺,保存物镜、转接倍率、相机模式与软件缩放状态。

Derivation

Translation pending review.

长度与像素跨度的比例定义图像尺度s。

Translation pending review.

在无显著畸变和一致缩放下,待测像素数乘s得到物方长度。

Translation pending review.

本工具接受亚像素跨度,但并不保证测量方法具有亚像素准确度。

Common pitfalls

Translation pending review.

屏幕显示放大倍率不能直接替代物方标定。

Translation pending review.

裁剪不改变尺度,但重采样会改变像素跨度,必须保留处理记录。

Assumptions

  • • 参考标尺和待测物使用同一物镜、相机适配、分辨率和数字缩放。
  • • 默认x/y像素尺度一致;非方像素或各向缩放需分别标定两个方向。
  • • 明显畸变时应进行位置相关标定,不能只用中心的一条标尺。

Illustrative example

Inputs

L_ref=100 µm,N_ref=500 px

N_object=125 px

Steps

Translation pending review.

尺度为100/500=0.2 µm/px。

Translation pending review.

长度为0.2×125=25 µm。

Result

Translation pending review.

尺度0.2 µm/px;测量长度25 µm。

Equation

s=L_ref/N_ref;L_object=s·N_object

Symbols & units

L_ref标尺已知物方长度µm
N_ref标尺对应像素跨度px
N_object待测线段像素跨度px
s物方长度/像素µm/px
L_object待测物方长度µm

Microscope image length calibration →

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.