SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
TOPICS

Depth at the 550 HV criterion

This entry gives the definition, variables, assumptions and a reproducible example for Depth at the 550 HV criterion. The equation holds only under the stated assumptions.

Derivation

Write inputs and outputs by definition and convert to the unit system required by the equation.

Check dimensional consistency, then judge whether the result is physically plausible.

Common pitfalls

Extrapolating an empirical equation beyond validated materials or conditions

Mixing unit systems without conversion

Assumptions

  • • Inputs are independent and measured as defined
  • • Conditions are stable without unmodelled bias
  • • Units and magnitudes stay within the valid range

Illustrative example

Inputs

Example inputs: Upper depth=0.3 mm; Lower depth=0.5 mm; Upper hardness=600 HV; Lower hardness=500 HV

Steps

Substitute and keep significant digits.

Result

See the default result in the linked calculator; values are illustrative.

Equation

d = d₁ + (H₁ − 550)/(H₁ − H₂) · (d₂ − d₁)

Symbols & units

d1Upper depthmm
d2Lower depthmm
H1Upper hardnessHV
H2Lower hardnessHV

Depth at the 550 HV criterion →

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.