SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
TOPICS

Miner cumulative damage

This entry gives the definition, variables, assumptions and a reproducible example for Miner cumulative damage. The equation holds only under the stated assumptions.

Derivation

Write inputs and outputs by definition and convert to the unit system required by the equation.

Check dimensional consistency, then judge whether the result is physically plausible.

Common pitfalls

Extrapolating an empirical equation beyond validated materials or conditions

Mixing unit systems without conversion

Assumptions

  • • Inputs are independent and measured as defined
  • • Conditions are stable without unmodelled bias
  • • Units and magnitudes stay within the valid range

Illustrative example

Inputs

Example inputs: Cycles at level 1=20000 1; Life at level 1=200000 1; Cycles at level 2=15000 1; Life at level 2=90000 1; Cycles at level 3=5000 1; Life at level 3=40000 1

Steps

Substitute and keep significant digits.

Result

See the default result in the linked calculator; values are illustrative.

Equation

D = Σ n_i / N_i

Symbols & units

n1Cycles at level 11
N1Life at level 11
n2Cycles at level 21
N2Life at level 21
n3Cycles at level 31
N3Life at level 31

Miner cumulative damage →

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.