Task and scope: in the General context this entry addresses Metallographic cutting, mounting, polishing and etching. Fix specimen state, measurand and record fields before choosing a method; unverified performance figures are excluded from conclusions. Method basis: GB/T 13298-2015 · ASTM E3 applies to Testing solutions. The workflow runs in six steps: define the measurand, prepare specimens, check references and equipment, fix the procedure, record raw data, then review and archive. Each step states inputs, outputs and a quality gate. Confirm specimens, equipment state, calibration records and acceptance rules against the standard; a family name does not establish a specific model's capability. Instrument role and limits: 金相试样切割机, 金相试样镶嵌机, 金相试样抛光机 perform preparation, measurement or review in this flow. The page states no range, accuracy or temperature limit. Model, accessories, conditions and delivery follow the specification table, factory documents and the agreed technical protocol. Verify the currently valid edition of each standard.
Standards basis
GB/T 13298-2015 · ASTM E3
Related instrument families
Metallographic specimen cutting machine · Metallographic specimen mounting press · Metallographic specimen polishing machine
Linked instruments
Based on GB/T 13298-2015 (see _v13_work/research_verified.md for the official-source verification record); the applicable edition of the standard is the one currently in force, and numerical values from its clauses are not cited as product performance commitments of this site.
Method guidance from public standards; not a performance claim for any model. Verify the current edition and configuration.
