MICROCRE · RESEARCH SCIENCE
Advanced and multiphase ceramics
Translation pending review.
Research objective
Relate pores, grains, phases and tensile surface condition to brittle failure while distinguishing hardness, strength and toughness.
Research questions
致密化改善是否同时改变晶粒、第二相和缺陷分布?
抛光拉出与真实孔隙是否被可靠地区分?
强度分散与表面加工、试样体积或局部缺陷之间有何证据?
Structure–property relationships
相对密度需要适用组成和体积定义,不能独自预测强度。
硬度反映局部压入响应,裂纹形貌与适用模型决定能否进行断裂参数讨论。
弯曲受拉面及尺寸影响失效概率,局部图像和少量高值不代表整批可靠性。
Limitations
压痕裂纹经验式不自动等同标准断裂韧度测定。
二维孔隙和晶粒统计不能无模型直接转为三维结构。
Related instruments, methods and research
Metallographic cutting →Electronic universal testers →High-temperature indentation →Metallurgical microscopes →Mounting presses →Grinding & polishing →Vickers hardness testers →
Advanced ceramics: density–structure–mechanics iteration →Reference planes: flatness, straightness and support →Microstructural dimensions: grains, phases and pores →Optical component angles and alignment chains →Particle dimensions: sampling, projection and shape →Compression: end faces, friction and instability →Flexure: geometry, supports and brittle statistics →High-temperature properties: equilibrium, drift and time →Hardness and indentation: scale and contact models →Thermal properties: diffusivity, heat capacity and density →
Metallographic cutting →Electronic universal testers →High-temperature indentation →Metallurgical microscopes →Mounting presses →Grinding & polishing →Vickers hardness testers →
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Orientation imaging microscopy: application to the measurement of grain boundary structure →Orientation imaging: The emergence of a new microscopy →A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements →The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte →Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques →Certification of Standard Reference Material® 2261a: Chlorinated Pesticides in Hexane (Nominal Mass Concentration 2 µg/mL) →Limit case analysis of the “stable indenter velocity” method for obtaining creep stress exponents from constant load indentation creep tests →Scaling approach to conical indentation in elastic-plastic solids with work hardening →Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results →Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C →Using nanoindentation to study the aging of cellulose acetate in cinematographic films →Computational modeling of the forward and reverse problems in instrumented sharp indentation →A procedure for extracting primary and secondary creep parameters from nanoindentation data →Size-affected single-slip behavior of pure nickel microcrystals →A method for interpreting the data from depth-sensing indentation instruments →Nanohardness and indentation fracture resistance of dual-phase high-entropy ceramic →Fracture Toughness Determinations by Indentation →High temperature nanoindentation – the importance of isothermal contact →Development of Reference Material 8103: Adamantane for Subambient DSC Temperature and Enthalpy Calibration →Certification of Standard Reference Material® 2232a: Indium for DSC Temperature and Enthalpy Calibration →Temperature dependence of the indentation size effect →The Measurement and Uncertainty of a Calibration Standard for the Scanning Electron Microscope →Distance-dependent influences on angle metrology with autocollimators in deflectometry →Environmental influences on autocollimator-based angle and form metrology →Self-calibration strategies for reducing systematic slope measurement errors of autocollimators in deflectometric profilometry →A novel approach for extending autocollimator calibration from plane to spatial angles →A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Anisotropy oxidation behavior and mechanism of textured Ti3(SiAl)C2 ceramic →Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing →A simple method for high-precision calibration of an angle encoder using an electronic nulling autocollimator →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Transmission EBSD from 10 nm domains in a scanning electron microscope →Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System →Indentation power-law creep of high-purity indium →An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments →On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Nanoindentation of B4C-HfB2 particulate ceramic composite doped with Cr–B compounds →Fiji: an open-source platform for biological-image analysis →NIH Image to ImageJ: 25 years of image analysis →Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments →Nanoindentation and contact-mode imaging at high temperatures →Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →Deformation mechanism and mechanical properties of TiN/ZrN nanolaminates by nanoindentation: effect of layer thickness and temperature →High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation →Thermally Activated Deformation Mechanisms in MgO Investigated via High Temperature Scanning Indentation →AFM z-piezo calibration method for height measurements in the sub-nanometer to nanometer range using stepped surfaces →Uncertainties in Small-Angle Measurement Systems Used to Calibrate Angle Artifacts →Hot nanoindentation in inert environments →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Uncovering dominant mechanisms of nano-mechanical properties of AlTaO4 ceramics from structural characteristics →Mechanical Metallurgy on Columbia Gas X100 Experimental Pipe →Elevated temperature, in situ indentation with calibrated contact temperatures →High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity →A systematic study of sample preparation-induced martensitic phase formation in 304 L austenitic stainless steel →ISO Technical Committee Guidance — 热分析曲线的可比性 →Scanning Electron Microscopy and X-ray Microanalysis →Thermal Analysis →
