MICROCRE · RESEARCH SCIENCE
Superalloys and heat-resistant metals
Translation pending review.
Research objective
Study phases and thermal history with temperature-dependent properties, controlling contact temperature, oxidation and time scale.
Research questions
处理前后组织位置和局部响应能否建立一一对应?
高温位移变化中有多少来自漂移、接触热不平衡或材料变形?
局部表征与宏观蠕变之间有哪些仍未验证的尺度关系?
Structure–property relationships
析出相、晶界和方向性可共同影响响应,光学形貌不足以独立确认所有相。
温度改变材料状态和测量系统,需要把热膨胀及漂移纳入同一误差模型。
热导率组合计算要求扩散率、热容和密度处于一致温度与状态。
Limitations
炉温、样品温度和接触温度不得混用。
局部压入保荷曲线不能无验证直接给出宏观蠕变寿命。
Related instruments, methods and research
Thermal analysis →High-temperature indentation →Metallurgical microscopes →Thermal & environment equipment →Temperature instruments →
Additive metals: build orientation, defects and properties →Superalloys: thermal history, phases and local response →High-temperature properties: equilibrium, drift and time →Thermal properties: diffusivity, heat capacity and density →
Thermal analysis →High-temperature indentation →Metallurgical microscopes →Thermal & environment equipment →Temperature instruments →
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Microstructure Analysis for Additive Manufacturing: A Review of Existing Standards →Limit case analysis of the “stable indenter velocity” method for obtaining creep stress exponents from constant load indentation creep tests →Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results →Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C →Computational modeling of the forward and reverse problems in instrumented sharp indentation →A procedure for extracting primary and secondary creep parameters from nanoindentation data →Size-affected single-slip behavior of pure nickel microcrystals →High temperature nanoindentation – the importance of isothermal contact →Development of Reference Material 8103: Adamantane for Subambient DSC Temperature and Enthalpy Calibration →Certification of Standard Reference Material® 2232a: Indium for DSC Temperature and Enthalpy Calibration →Investigation of complementary use of optical metrology and x-ray computed tomography for surface finish in laser powder bed fusion additive manufacturing →Temperature dependence of the indentation size effect →A novel approach for extending autocollimator calibration from plane to spatial angles →A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature →Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients →Infrared Optical Properties of Materials →Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing →Evaluation of measurement data — Guide to the expression of uncertainty in measurement →Evaluation of measurement data — Guide to the expression of uncertainty in measurement. Amendment 1: Nonlinearity in measurement models →Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method →Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models →Transmission EBSD from 10 nm domains in a scanning electron microscope →Indentation power-law creep of high-purity indium →An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures →Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results →Indentation size effects in crystalline materials: A law for strain gradient plasticity →Traceability Calibration, & Measurement Uncertainty Issues Regarding Coordinate Measuring Machines and Other Complex Instruments →Fiji: an open-source platform for biological-image analysis →NIH Image to ImageJ: 25 years of image analysis →Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments →Nanoindentation and contact-mode imaging at high temperatures →Comparison of Bulk and Micro Sampling Techniques for the Elemental Analysis of SRM 610 and 612 →Deformation mechanism and mechanical properties of TiN/ZrN nanolaminates by nanoindentation: effect of layer thickness and temperature →High-Temperature Mechanical Characterization of CeO2 as a Ceramic Surrogate Fuel Based on FIB and Nanoindentation →Thermally Activated Deformation Mechanisms in MgO Investigated via High Temperature Scanning Indentation →Hot nanoindentation in inert environments →Sample dimensions influence strength and crystal plasticity →Certification of Standard Reference Material® 2246a Relative Intensity Correction Standard for Raman Spectroscopy: 830 nm Excitation →NIST Surface Roughness and Step Height Calibrations: Measurement Conditions and Sources of Uncertainty →Elevated temperature, in situ indentation with calibrated contact temperatures →ISO Technical Committee Guidance — 热分析曲线的可比性 →Thermal Analysis →
