布氏硬度计 — Vickers hardness profile and case depth
A schematic of the measurement chain, not device footage or data.
Schematic demonstration: scale, speed and colour do not represent instrument measurements.
Translation pending review.
Instrument role
Measurement and analysis
Operating principle
For this task the 布氏硬度计 family measures as follows: Vickers hardness profile and case depth. The general relation and its conditions are given below; confirm force, travel, resolution and accessories for a specific model.
HRB = 130 − h / 0.002
- Symbol
h
ItemResidual depth
Unitmm
Conditions are stable and calibrated as defined
Inputs are independent without unmodelled bias
Interpretation stays within this family and the stated conditions
Research objects
Research object: 42CrMo quenched and tempered steel
Research object: 20CrMnTi carburising steel
Research object: 40Cr alloy structural steel
Research questions
What dominates the error budget for Vickers hardness profile and case depth?
Does the conclusion hold for another batch or process?
Applications
Vickers hardness profile and case depth: 42CrMo quenched and tempered steel
Vickers hardness profile and case depth: 20CrMnTi carburising steel
From specimen to result
- 01Title
Fix the hardness scale and criterion
ActionTurn the task into verifiable measurands: state which standard or technical agreement defines %s, and fix the record fields.
InputPrevious output
OutputStep 1 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 02Title
Prepare and inspect the surface
ActionPrepare specimens or measurement points for the material and purpose: grind and polish the surface without overheating or cold work; keep faces parallel and at least ten indentation depths thick.
InputPrevious output
OutputStep 2 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 03Title
Verify test force and indenter
ActionVerify calibration status, fixtures and sensor ranges against the environmental envelope; complete the uncertainty budget before measuring.
InputPrevious output
OutputStep 3 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
- 04Title
Space indents and measure
ActionExecute the fixed method with identical parameters; stabilise the environment within the specified time and log any abnormal condition separately.
InputPrevious output
OutputStep 4 record
Quality gateThe acceptance basis traces to a standard clause or technical agreement
If the check failsInstruments for this stepReturn and re-check
- 05Title
Handle outliers and statistics
ActionJudge the main value, outliers and repeatability; keep raw records for any rejected point and state the basis instead of deleting it.
InputPrevious output
OutputStep 5 record
Quality gateEnvironmental conditions and stabilisation time are logged continuously
If the check failsInstruments for this stepReturn and re-check
- 06Title
Report values and decision
ActionReport method, conditions, results, uncertainty and applicability limits; do not extrapolate beyond the tested environment.
InputPrevious output
OutputStep 6 record
Quality gateRaw data, processing and the decision are reproducible
If the check failsInstruments for this stepReturn and re-check
Methods and standards
hardness testing
Confirm force, range and threshold against the applicable standard
Standards and applicability
GB/T 231.1-2018
GB/T 231.2-2022
GB/T 231.3-2022
GB/T 231.4-2009
GB/T 1172-1999
Configuration and service checks
Calibration and intermediate check records
Fixtures, accessories and range confirmation
Limitations
Family-level guidance, not a specific model capability
Re-confirm method and criteria outside the stated conditions
Search terms
高温压痕
采集频率
100Hz
仪器全自动化
升级改造
氧化腐蚀
AI
材料性能预测
硬度计
Related instruments, methods and research
Paper links indicate related methods or objects; they do not establish use of this instrument model.
Relation commonly used for this task
