SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
INDUSTRIES

Energy equipment, welds and service-exposed materials

Assess pipes, welded joints and heat-exposed materials through microstructure, hardness and mechanical evidence. Record service history, corrosion and location before interpretation. Laboratory screening supports investigation, while remaining-life or continued-service decisions require dedicated engineering assessment.

Theory & worked calculations

Item

Translation pending review.

承载截面:面积损失的名义应力影响:模型与量纲

Equation

σ1=F/A1;σ2=F/A2

Variables & dimensions

F=15000 N;A1=25 mm²;A2=22.5 mm²

Assumptions & limits

Translation pending review.

真实缺陷会产生应力集中,材料还可能有塑性与残余应力;本例未给强度、温度或使用准则,因此不能据此判定可继续运行。

Worked example

Translation pending review.

假设输入演算:15000/25 = 600 MPa;15000/22.5 = 666.666667 MPa;(25/22.5−1)×100 = 11.111111 %。面积与应力成倒数关系。这个例子说明记录几何尺寸的重要性,不构成材料承载能力、部件安全裕度或剩余寿命计算。

Reporting requirements

Translation pending review.

以试样编号关联原始图像、测量序列、设备配置及方法版本。

Translation pending review.

分别报告重复性、异常处理及本模型未覆盖的影响因素,不用演算示例替代实测。

Common misconceptions

Translation pending review.

一个载荷点不能给出屈服强度或疲劳寿命;须保留完整曲线并按适用方法求取指标。

Translation pending review.

横梁位移包含试验机及夹具变形,不可未经验证当作标距内应变。

Workflow & steps

01

Record service and sampling

Collect available material IDs, temperature and load history, operating time and maintenance; mark inner/outer surfaces and flow direction. Photograph and locate cracks or oxides before sampling or cleaning removes evidence.

02

Prepare connected regions

Preserve continuity between base metal, heat-affected zone and weld; retain surface boundaries for corrosion or coatings. Control thermal damage, edge loss and pore contamination during sectioning and mounting; keep untreated reference regions.

03

Cross-check structure, hardness and geometry

Register microstructure, hardness paths and defect geometry and inspect enough fields around local anomalies. Separate structural changes, heterogeneity and artefacts; review original indents and sampling for an isolated hardness outlier.

04

Add applicable mechanical tests

Choose ambient or elevated-temperature testing for the material and service question, checking specimen relevance, loading and temperature records. Small and standard specimens are not interchangeable without validation of size and sampling effects.

05

Report evidence at the right level

Separate observed facts, possible mechanisms and further tests, attaching originals and conditions. Irradiated or controlled materials require appropriately qualified facilities; this general workflow makes no claim of specialist accreditation.

Checks

  • • Retain service history and surface evidence
  • • State small-specimen limitations
  • • Separate observations from engineering decisions

Illustrative example

Teaching example: compare weld, heat-affected zone and base-metal structure and hardness, then check whether local anomalies repeat. No remaining-life estimate or permission to continue operation is given.

Related instruments & resources

Links support navigation and do not establish a model’s performance or standards compliance.

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.