SHANGHAI MICROCRE OPTICS-MECH TECH CO., LTDAbout MICROCRE400-812-7833
ZMP-1000 · 1
ZMP-1000 · 2
ZMP-1000 · 3
3D turntable
1 / 3
MODEL · ZMP-1000

ZMP-1000 · Grinding & polishing

Explore the original technical specifications, related methods and configuration options. Chinese source specifications are retained for accuracy.

Product description

同时可磨制8个试样块,选配特殊夹具能对特殊规格尺寸的样块进行精密研磨抛光。

可实现对常规黑色金属、有色金属、各种合金、陶瓷、岩石、玻璃、电子器件以及一些新型材料类等各种材料的精密研磨抛光,能够满足各级实验室的快速、高效、精密制样要求。

II. Main features:

  • Automatic storage of grinding and polishing programs: Features automatic storage of 100 grinding and polishing programs, enabling quick selection of grinding and polishing programs for various material samples.
  • PLC intelligent control system: color touchscreen, PLC control system, menu-based options, and intelligent operating interface.
  • Intelligent Accessory Addition System: An intelligent dual-abrasive automatic addition and spraying system that enables automatic abrasive spraying and addition during the grinding and polishing process.
  • Lapping and polishing pressure control system: PLC-controlled pressure regulation system, automatically switches and adjusts the pressure values of each level.
  • Grinding multiple samples simultaneously: Up to 8 samples can be ground at the same time, and special fixtures can be customized for specific samples.
  • Multiple operating modes: intelligent grinding/polishing, manual grinding/polishing (automatic and semi-automatic grinding/polishing).
  • Pneumatic pressurization system (air pressure 0.5 MPa): Pneumatic pressurization (single-point/central pressurization)

Specifications

ParameterValue / description
ModelZMP1000
Body configurationDesktop Single-Disk
Clamping capacity (pcs)8个(特殊规格样件可定做)
Loading method气动(单点/ in 心加压)
Single-point pressure(1-72N)X8
Center pressure300N
Operation modeIntelligent automatic
Control systemColor touch screen, PLC control
Grinding/polishing speed50-1500转/分钟(智能自动调速)
Grinding head speed20-200 rpm (automatic speed control)
Grinding parametersSmart storage, capable of storing up to 100 grinding and polishing programs
Abrasive dosingDual-channel intelligent automatic dispensing
Dosing intervalSmart settings, minimum feeding interval of 0.1S
Spraying timeSmart setting, minimum dispensing time 0.1S
Grinding time0–9999 seconds
Main unit power1000W
Grinding diameterΦ8-40mm(特殊规格尺寸可以选配)
Grinding disc diameter230mm (Optional200、250、300mm)
Dimensions450mm*650mm*700mm
Power supply220V/50HZ
Metallographic abrasive paper240, 600, 1000, 1500# (other sizes 400, 2000#, etc.) for grinding conventional metal specimens.
Diamond grinding disc240, 600, 1000, 1500# (other sizes 400, 2000#, etc.) for grinding superhard material specimens.
Diamond abrasive paperGrit size: 45-0.3um (for precision grinding and rough polishing of superhard materials such as ceramics and crystals).
Polishing clothWool felt, velvet, wool cloth, etc. (special materials also require multi-step polishing such as rough and fine polishing).
Diamond polishing compoundGrit size: 40-0.5um (a widely used polishing consumable, suitable for polishing all kinds of materials).
Diamond suspensionGrit size: 40-0.5um (a widely used polishing consumable, better suited for automatic grinding/polishing machines).
Alumina polishing powder粒度:30-0.5um (适合碳钢类样件的抛光)。
Magnetic grinding discEasier replacement of abrasive paper and polishing cloths.
Particle size / grit45-0.3um(适合超硬材料的精密研磨及粗抛,如陶瓷、晶体等材料)。
Specifications, options and final delivery conditions follow the confirmed technical agreement and factory documents; verify any model discrepancy with an engineer.

Related methods & standards

Metallographic preparation: five steps to preserve the microstructure ↗Cutting burn control on hardened steel: method essentials and limits ↗Distortion-free sectioning of sheet and foil: method essentials and limits ↗Retaining coating edges in cross-section: method essentials and limits ↗Mounting and chamfering of thermal-spray coatings: method essentials and limits ↗Vacuum impregnation of porous materials: method essentials and limits ↗Avoiding smearing between composite plies: method essentials and limits ↗Preventing scratches and embedded abrasive in soft metals: method essentials and limits ↗Diamond polishing of ceramics and cemented carbide: method essentials and limits ↗Electrolytic polishing of aluminium alloys: method essentials and limits ↗Avoiding hydrogen pickup in titanium preparation: method essentials and limits ↗Sectioning across weld zones: method essentials and limits ↗Measuring heat-affected zone width: method essentials and limits ↗Preparation for grain size measurement: method essentials and limits ↗Consistency for inclusion rating: method essentials and limits ↗Preserving graphite morphology in cast iron: method essentials and limits ↗Porosity preparation for additive parts: method essentials and limits ↗Cross-sectioning of battery electrodes: method essentials and limits ↗Ion-beam polishing of semiconductor cross-sections: method essentials and limits ↗Petrographic thin section preparation: method essentials and limits ↗Protecting fracture surfaces during sectioning: method essentials and limits ↗Reproducible automatic polishing parameters: method essentials and limits ↗Effect of preparation quality on hardness: method essentials and limits ↗Consumable selection and cost control: method essentials and limits ↗Preparation safety and waste handling: method essentials and limits ↗

GB / Chinese standards

GB/T 13298-2015 ↗GB/T 226-2015 ↗GB/T 13298-2015 ↗

ISO

Confirm the applicable method and standard.

Topic-based references do not certify this model or establish full conformity. Confirm the applicable edition, configuration and test conditions.

SCIENCE / ZMP-1000

Explore research with this instrument.

Open series research profile ↗

Scientific detail below is the Chinese source edition; reviewed full translations are pending.

Series-level guidance · Sample preparation · Confirm model capabilities, accessories and specifications.

Working principle & animation

Abrasives and polishing media remove surface material step by step, balancing flatness, edge retention and the removal rates of different phases. The final surface must pass microscopic inspection.

The schematic explains the basic mechanism; it is not a structural drawing of this model, an operating instruction or a measured result.

Progressive grinding and removal of the surface deformation layer

Schematic model, not device footage or experimental data.

Removal amount, pressure and time must be optimized by material testing; there is no universal fixed recipe.
  • Methods and models apply only under the confirmed specific model, accessories and sample conditions.

Research objects & questions

  • Metallographic cross-section of metal
  • Multiphase composite
  • Pore and coating interfaces
  • Do scratches, smearing or pull-out come from preparation or from the material?
  • Does relief or edge rounding occur between soft and hard phases?

Testing & operation workflow

Follow inputs, actions, outputs and quality gates.

  1. 01

    Define the object and outcome

    Define the research question: Do scratches, smearing or pull-out come from preparation or from the material?; Does relief or edge rounding occur between soft and hard phases? Record sample identity, target result and required configuration in the test plan.

    Input
    Sample information, technical drawings / study protocol and documentation for this model
    Output
    A record specifying the object, outcome definition and available configuration
    Quality check
    Required functions are evidenced in the specific model and accessories; unverified functions remain to be confirmed
  2. 02

    Prepare samples and conditions

    Assess previous cutting damage and mounting quality; record sample orientation and target area.

    Input
    Defined research object and sample information
    Output
    Traceable samples and preparation conditions
    Quality check
    Sample securely fixed and target area preserved
  3. 03

    Check references and equipment

    Check grinding disc flatness, fixture parallelism, rotation speed and coolant supply.

    Input
    Prepared samples, reference specimens and equipment records
    Output
    Verification records and availability status
    Quality check
    No abnormal runout of the grinding disc or fixture
  4. 04

    Establish the method and procedure

    Select abrasive sequence, polishing cloth, load and rotation direction by material; avoid cross-step contamination.

    Input
    Verification results and actual available configuration
    Output
    Saved conditions, parameters and termination rules
    Quality check
    Abrasive grit size compatible with the material
  5. 05

    Execute and save raw records

    Grind and polish step by step with cleaning in between; rotate the specimen to identify residual scratches from the previous step.

    Input
    Approved test procedure and quality control settings
    Output
    Raw data, process conditions and anomaly records
    Quality check
    Thorough cleaning and controlled temperature rise at each step
  6. 06

    Review results and model

    Inspect scratches, relief, pull-out and edge retention under a microscope; return to a previous step if needed.

    Input
    Raw signals, reference data and method definition
    Output
    Results with applicability limits and review records
    Quality check
    The surface is true, not merely mirror-bright
  7. 07

    Archive and reproduce

    Archive the sample ID, model/accessories, raw records, processing version and anomaly handling with cross-references. Re-measure under identical conditions or check disputed results against the reference method.

    Input
    Reviewed results, raw records and configuration list
    Output
    Traceable research/process records and follow-up verification items
    Quality check
    Teaching calculations, demonstration simulations and real measured data are clearly distinguished; unverified items in the materials are not presented as performance commitments.

Workflows & applications

  • Application: metallographic cross-section of metal; Research objective: Do scratches, smearing or pull-out come from preparation or from the material?
  • Application: multiphase composite; Research objective: Does relief or edge rounding occur between soft and hard phases?
  • Application: pore and coating interfaces; Research objective: Do scratches, smearing or pull-out come from preparation or from the material?

Methods & standards

  • Preparation of metallographic specimens

Verify the edition, specimen and configuration. Links do not constitute certification or a conformity claim.

Calculations & simulation

Such devices or accessories do not necessarily produce an independent measurand. First use the workflow below to confirm the calculation object, calibration basis and input units, then use the relevant reference tools.

Reference calculations ↗

Scientific literature connection

Links indicate related methods or research objects, not evidence that a paper used our instruments.

Resources, service & limits

  • Check grinding disc flatness, fixture parallelism, rotation speed and coolant supply.
  • Abrasive grit size compatible with the material
  • Verify the delivered model, required accessories, method scope and raw data output; do not infer performance from the series name.
  • Removal rates differ between phases; a mirror finish does not mean a deformation-free layer.
  • This dossier covers principles and research workflow; the absence of a measuring-range statement on the page does not mean the device has no limits: the specific range and configuration are subject to technical verification.

Related industry research

Similar instruments

Other models in Grinding & polishing and the same instrument family.

Browse the whole family ↗

Your next research question. Let’s explore.

Tell us about your material, specimen and measurement goal.

Discuss your application ↗
Find your instrument
⌕
Search products, cases, solutions, standards and literature.